.

Friday, January 3, 2020

Synthesis And Recrystallization Of Adipic Acid - 1366 Words

Experiment 1: Synthesis and Recrystallization of Adipic Acid Aim The current experiment sought to prepare 1,6-hexanedioic acid (adipic acid) by catalytic oxidation of cyclohexene in the presence of a phase-transfer catalyst (Aliquat 336), using sodium tungstate as a catalyst and hydrogen peroxide as an oxidant. Introduction The carbon-carbon double bond of alkenes represents a site that has a high electron intensity. This site is susceptible to oxidation. Depending on the conditions or reagents used to initiate the oxidation of alkenes, various products can be obtained. With relative mild oxidation, it is only the pi bond of an alkene that is cleaved resulting in the production of 1,2-diols or epoxides. However, when there is more vigorous†¦show more content†¦This way, cyclohexane is converted to adipic acid or hexanedioic acid. Since the product is soluble in hot water, the two-phase systems (organic cyclohexane and aqueous hydrogen peroxide) slowly become a single aqueous phase. In the end, only H2O2 and cyclohexene can be changed, tungstate and the phase transfer catalyst can be tapped and reused. The phase transfer catalyst used were a mixture of aliquat 336 and potassium hydrogen sulphate. Experimental procedure A 0.5 g of sodium tungstate dihydrate was weighed and transferred into a 50-mL round-bottom flask with a magnetic stir bar. Approximately 0.6mL of Aliquat 336 was then transferred carefully into the round bottom flask using a 1mL syringe. The round bottom flask and its contents were then set up in an oil bath. 11mL of 30% hydrogen peroxide and 0.37 g of potassium bisulphate were added to the reaction mixture in the round bottom flask and stirred using a magnetic stirrer. Lastly, 2.5mL of cyclohexene was added using automatic dispenser and the mixture stirred. A condenser was fitted on the round bottom flask, clamped and attached to water horses. The reaction mixture was then heated on the oil bath and the reflux process initiated for an hour while stirring the mixture vigorously. Half way while rinsing, any trapped cyclohexene in the condenser was rinsed. After 1 hour, the round bottom flask was rinsedShow MoreRelatedSynthesis of Adipic Acid Essay example1667 Words   |  7 PagesEx periment 8: Synthesis of Adipic Acid Performed November 8th amp; 10th By Jennifer Seitz Organic Chemistry 344 Section 803 Fall 2011 Objective: The purpose of this experiment was to synthesize adipic acid from cyclohexanol via an oxidation reaction that was catalyzed by sulfuric acid. Purity of the product was assessed by measuring the melting point. Physical Properties/Structures: Name | Formula | Molecular Weight (g/mol) | Boiling Point (0C) | Melting Point(0C) | Density(g/mL)Read MoreAdipic Acid43555 Words   |  175 PagesINTRODUCTION 1. HISTORY AND GENERAL INFORMATION ON ADIPIC ACID 1. History on The Production Adipic acid is an important organic chemical raw material. In China, it is used as raw material in the production of Nylon 6/6 salt, polyurethane, plasticizers, high-grade lubricants and food additives. With the rapid growth of development, the application of adipic acid keeps expanding. The production of adipic acid is controlled in the hands of multinationals. An American chemical

No comments:

Post a Comment